Amazing Tips That Will Help you to Get Rid of Construction Dust

You renovated your home recently? And the tedious task of cleaning after falls on you? You did it by yourself or with professional help? Doesn’t matter. In both cases, you would agree that the post construction cleaning is one of the hardest tasks. It is sometimes even harder than the renovating itself. Keep reading to find out how to remove the construction dust from the walls and floors in your home.

Before you start the post construction cleaning :

The first thing that you should do is try to contain the dust only in the work area. We know it is a hard job since it has the quality to spread everywhere like some kind of dark magic, but it is important. Not only it will save you some time and energy when cleaning after, but it will also protect you from a lot of toxins and carcinogens, that the construction dust contains.

Store your personal belongings and things, in which the dust can easily sweep in. Even if you are not renovating the whole house, you should not keep these things in the other rooms. As already mentioned, the dust goes everywhere and is almost impossible to locate it only in the work area.

Another very important thing is that you should prepare a decent vacuum cleaner and a mop. If the vacuum you own is too old and not powerful enough, or if the mop is outworn you need to get yourself proper ones. There are also some other things you’re going to need in the process. However, these are the most necessary ones for post construction cleaning, so they shouldn’t be neglected.

Cleaning expert, Sharon Heath from Simply Maid Sydney says “In case you don’t have the proper equipment or you don’t have the time to handle such tedious task, we suggest hiring professional cleaners”. Although our tips will help you a lot, this is a job that takes a lot of time and energy. By hiring professionals you can be sure that the job will be done perfectly. They will not only clean every bit of dust covering your walls and floors, but will also do it quickly, saving your time and effort.

How to clean construction dust off walls:

Unpainted walls

There may be walls in your home that for some reason are left unpainted. Probably because you haven’t decided on the colour, yet. However, if you want to clean them anyway, you should start by:

Covering the carpets and moving the furniture. You can use old sheets or towels and you should also think about protecting the other walls in the room if they have been painted already. The second step is to start removing the construction dust. Since the walls are still unpainted, you can use both a broom or a vacuum cleaner, it doesn’t matter what you’re going to choose. Usually, the final step is to wash the walls, but it is optional in this case, since they are not painted, yet. However, if you decide to wash them, keep in mind that you should start from the top of the wall and move slowly in order not to leave behind any stains. This rule goes for all the different types of walls.

Painted walls

Most importantly, keep in mind, that if the walls have been painted recently, which is normally the case with post construction cleaning, you must wait for the paint to dry completely. You can start by vacuuming first, but in this case, it is mandatory not to use a broom, since it can harm the paint. The essential part is the washing.

Assuming that you have just renovated and there are no stains, just dust, warm water should do the job. You can also use a soapy water, but be careful not to put too much soap, as this will cause the paint to fade. You can use a soft sponge or a towel.

Wooden walls

You can start by using a broom or a brush attachment at the end of the vacuum cleaner. You can be less gentle here since the walls are not painted. After that use warm soapy water to wash the walls. You can also supplement a mild detergent to make the wood shinier and better looking.

Wallpapered walls

The only difference here would be if the wallpapers are embossed. If this is the case, the most important thing is to spend some time with the broom first. Both the sweeping and the vacuuming are mandatory.

After making sure that all the little details of the wallpapers are cleaned from the construction dust, finish by washing them with warm water and a soft towel.

How to clean construction dust from different floor types:

Ceramic tile floors

This type of floors is usually found in your bathroom. Probably you would think that, after washing the bathroom with hot water or just showering, the floor will be clean enough. However, this is a common deception and you need stronger weapons in the post construction cleaning. cleaning construction dust from ceramic tile floors

The first thing that you should do is to start by vacuuming the floor. After that, you can fill up а bucket with warm water and mop the floor with the help of a micro-fibre mop and a mild cleanser.

The most important thing here is to avoid using a sponge mop since the tile floors have grout tracks. In order not to trap the dust in those tracks, use a circular pattern when mopping.

Hardwood floors 

Of course, the first step is again to dust the floor. Many of the attachments of the vacuum cleaner can scratch your floor, therefore it is best to use the floor brush attachment.

Afterwards, you can use warm water to mop with a soft towel. The difference here is that you can and according to us, you must use a wood polishing product at the end. This way, after you’ve finished the post construction cleaning the dust won’t stick again to the floor.

Carpets and rugs

Start by vacuuming. The most important thing here is to use the vacuum cleaner with fresh filter bag for maximum airflow and effectiveness and also at the highest power level.

Cleaning construction dust from carpets

Since we are talking only about dust, we don’t recommend washing, because instead of
cleaning it you can worsen the situation. If it is not done properly, the dust might soak in the
carpet and turn into real dirt.

Laminate floors

Since the laminate flooring is known to be one of the most last longing surfaces,
correspondingly one of the hardest to harm, you have many options here.

You can dust, sweep or vacuum. However, it is similar to the hardwood floors, although tougher,
and again you should not use vacuum attachments that can scratch it.

The more important thing is that you can add a soft cleanser to the warm water to polish it. But
remember to wipe dry it, in order not to leave stains.

Privacy Preference Center

Close your account?

Your account will be closed and all data will be permanently deleted and cannot be recovered. Are you sure?